DeFelsko STDP1 Certified Polystyrene Test Block Kits, Block 1: 375 mils - 15 mils, Block 2: 2 mm - 80 mils, Block 3: 4.5 mm - 185 mils, Block 4: 6.5 mm - 250 mils, for use with PosiTector 6000 FT, FTS, NTS, FNTS, FTRS and PosiTector 200 D

All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.

---

Ideal for use in the calibration lab, in the field or on the factory floor

---

Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.

Features

---

• Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
• Ideal for use in the calibration lab, in the field or on the factory floor
• Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
• Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
• Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
• Certified and labeled in both Metric and Imperial units
• Accuracy: (2.5 m + 0.05% of thickness) | (0.1 mil + 0.05% of thickness)

Specifications

---

Order Code	Ideal for
STDP1	PosiTector 6000FT, FTS, NTS, FNTS, FTRS PosiTector 200D
STDP2	PosiTector 6000 FHS, FJS, NHS, EOC
STDP3	PosiTector 100C
STDP4	PosiTector 100D
STDP5	PosiTector 6000FKS, NKS
STDP6	PosiTector 200C
STDP7	PosiTector 6000FHXS
STDP8	PosiTector 6000FNGS, FLS

Ordering Guide

---

Order Code	Approximate Thickness
	Block 1	Block 2	Block 3	Block 4
STDP1	375 m 15 mils	2 mm 80 mils	4.5 mm 185 mils	6.5 mm 250 mils
STDP2	2.5 mm 100 mils	6.5 mm 250 mils	13 mm 500 mils	19 mm 750 mils
STDP3	375 m 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils
STDP4	1.5 mm 60 mils	2.5 mm 100 mils	4.5 mm 185 mils	6.5 mm 250 mils
STDP5	1.5 mm 60 mils	2.5 mm 100 mils	6.5 mm 250 mils	12 mm 480 mils
STDP6	375 m 15 mils	1.5 mm 60 mils	2.5 mm 100 mils	3 mm 125 mils
STDP7	1.5 mm 60 mils	4.5 mm 185 mils	6.5 mm 250 mils	9.5 mm 375 mils
STDP8	13 mm 500 mils	13 mm 500 mils	13 mm 500 mils	19 mm 750 mils

All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.

P1-P7 Blocks: 38 x 70 mm (1.5" x 2.75")

P8 Blocks: 76 x 76 mm (3.0" x 3.0")

Downloads

---

DeFelsko Accessories for Inspection Instruments - Online Catalog